Re: ROM 11.1 & IOS 12.1
Отправлено: vaska on April 10, 2000 at 10:47:50:
В ответ на: Re: ROM 11.1 & IOS 12.1 posted by Igor Pertsevoy on April 09, 2000 at 10:24:36:
> > HI ALL !
> > имеется киска 1601 :
> > eprom:c1600-boot-r.111-10.AA
> > flash:c1600-y-l.111-12.AA
> > ест возможность сменит IOS на с1600-y-mz.112-16.P
> > или с1600-y-mz.120-7.bin , но ROM их не гружет
> > говорит что > > Error : memory requirements exceed available memory
> > Memory required : 0x00383F1C > > *** EXCEPTION ***
> > software forced crash
> > program counter = 0x200514e
> > status register = 0x2700
> > vbr at time of exception = 0x4000000 > > monitor: command "boot" aborted due to exception > > что делат ROM сменит ?!! если ето так то как ето делается ? :))))
> > а если ето не так то в чомже тогда проблема ??!! > > заранее блогодарен.
> sh ver приведи.
> кажеться у тебя оперативки мало. >>Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-Y-L), Version 11.1(12)AA, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Compiled Mon 09-Jun-97 14:20 by krunyan
Image text-base: 0x0801A214, data-base: 0x02005000
ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc
1)
ROM: 1600 Software (C1600-BOOT-R), Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Router uptime is 0 minutes
System restarted by power-on
System image file is "flash:c1600-y-l.111-12.AA", booted via flash
cisco 1601 (68360) processor (revision C) with 1536K/512K bytes of memory.
Processor board ID 08351071
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
1 Serial(sync/async) network interface.
System/IO memory with parity disabled
2048K bytes of DRAM onboard
System running from FLASH
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read ONLY)
Configuration register is 0x2105
>>если проблема в оперативке , то сколко надо дла нормалнои работы ?
Отклики:
Написать ответ
| 
